Industrial Decarbonization tenders — page 2
86 listings tracked right now · page 2 of 2
Industrial decarbonization is where the largest single climate cheques get written. The EU Innovation Fund (€40bn+ through 2030), US DOE Industrial Demonstrations Program ($6.3bn IIJA-funded), UK Industrial Energy Transformation Fund (IETF), and the EU Just Transition Fund all target heavy industry, primarily steel, cement, chemicals, refining, and glass. Cheques are large (€20M–€500M typical for a Innovation Fund award) and competitive. Listed below are the open industrial decarbonization tenders and contract notices that landscape produces, taken from each buyer's own notice and re-checked on every refresh.
Contracts in this area come from manufacturers, waste authorities and local government buying collection, sorting, recovery and materials services. Public waste contracts in particular are long, heavily specified and often let by consortia of authorities, so the tender documents run to hundreds of pages and the bid window is the constraint rather than the technical fit.
This page lists open industrial decarbonization tenders and public contracts currently tracked by Raise Lens — 86 of them right now, sorted with the soonest deadline first. Every listing has been classified against the sustainability taxonomy rather than matched on keywords, so what appears here is industrial decarbonization work rather than anything whose description happens to mention it.
The buyers publishing industrial decarbonization tenders and public contracts here include Technische Hochschule Ulm, H2 Wind Saar GmbH, Stadtwerke Schwerin GmbH (SWS), among 2 others. Who is funding matters as much as what: eligibility, reporting burden and the realistic timeline to a decision vary far more between buyers than between individual calls.
Geographic coverage on this page spans LATAM, AFRICA, ASIA, GLOBAL-SOUTH. Eligibility is usually tied to where the work happens or where the applying organisation is registered, and the two are not always the same — worth checking before investing time in an application.
3 of these close within the next 30 days. Deadlines are taken from the source listing and re-checked on every refresh, but the originating buyer remains the authority — always confirm against the official notice before you submit.
Engineering services – liquid hydrogen evaporation test rig for decentralized hydrogen infrastructure research
••••• University· DE
Procurement of a cryogenic liquid hydrogen evaporation test rig for research into decentralized hydrogen infrastructure, including design, supply, assembly, commissioning, and maintenance. Bidders should be specialized engineering firms with expertise in cryogenic systems, hydrogen technology, and experimental apparatus design.
Electrolyser 2026 for hydrogen production with compression, storage, filling
••••• organisation· DE
Procurement of an electrolyser plant for hydrogen production including compression, storage, and filling station. Bidders should have expertise in hydrogen production technology, industrial gas handling, and renewable energy integration.
Transformation Planning for Waste-Heat Integration: Municipal Utility District-Heating Module
••••• Municipality· DE
This tender procures transformation planning and feasibility studies for waste-heat utilization integration into Schwerin's municipal utility district-heating network. Bidders should have expertise in thermal energy systems, industrial waste-heat recovery, and energy-transition planning for municipal utilities.
Specialized professional services for climate adaptation and mitigation implementation
••••• organisation· CO
This tender procures specialized professional services to support climate adaptation and mitigation activities in Santiago de Cali, Colombia, under a specific climate-action project. Bidders should be consulting firms, environmental specialists, or engineering companies with expertise in climate resilience and emissions reduction.
Accompanying Evaluation Structural Change Coal Regions 2027–2032
••••• Ministry· DE
Scientific evaluation of structural change in German coal regions (2027–2032), including assessment of the Investment Act for Coal Regions and STARK federal programme, plus administration of a national microdata database. Bidders should have expertise in energy-transition evaluation, programme assessment, and research-data management.
Expert witness services – Framework agreement – Expert pool for energy, transport, climate
••••• organisation· DE
Framework agreement to establish a pool of up to 20 expert consultants for preparing BMZ-funded development projects in energy, transport, and climate change, targeting professionals with initial experience in project development and EU co-financing. Bidders must be individual experts or consulting firms offering qualified staff for short-term assignments in project appraisal, concept notes, and EU proposal preparation.
Simultane Thermo-Analysen-Apparatur
••••• University· DE
Procurement of a simultaneous thermal analysis apparatus for research into heat-storage materials and CO2 capture from exhaust gases at a German university chemistry department. Bidders should be laboratory equipment manufacturers or suppliers with expertise in thermoanalytical instrumentation for materials characterization.
Refuse-derived fuel component collection and recovery services
••••• organisation· PL
Procurement for collection and recovery of RDF (refuse-derived fuel) production components from a waste management facility in Poland. Bidders must be waste processors or energy recovery operators capable of handling pre-sorted, baled waste streams with specified calorific and moisture parameters.
Environmental issues consultancy services
••••• University· NL
The funder seeks consultancy services for ESG/CSR advice, CO₂ strategy, circular economy, and sustainable procurement—no technical audits. Bidders should be sustainability consultancies or advisory firms with expertise in corporate environmental strategy and supply-chain decarbonization.
Engineering services – Planning for a 4th treatment stage at a German central wastewater facility
••••• Municipality· DE
Engineering planning services for design and implementation of a 4th treatment stage at Chemnitz central wastewater treatment plant to meet EU and German environmental standards for trace substance removal. Bidders must be engineering/environmental consultancies with wastewater treatment process design expertise and familiarity with German regulatory frameworks.
Procurement of Tank Covers
••••• organisation· GB
Procurement of design, supply, and installation of impermeable tank cover systems for wastewater and water treatment plants across ~24 sites to reduce process emissions by ~20,000 tCO₂e as part of a Net Zero Investment Programme. Bidders must be engineering/manufacturing firms capable of structural assessment, bespoke cover design, fabrication, installation, and commissioning on live operational assets.
Engineering services – Hamburg CO₂ emissions reduction projection report
••••• organisation· DE
Hamburg seeks engineering services to produce a CO₂ emissions reduction projection report assessing compliance with statutory climate targets under the Hamburg Climate Protection Act. Bidders should have expertise in emissions accounting, climate modelling, and energy-sector analysis.
Test stand for electric and hybrid agricultural machinery investigation
••••• organisation· DE
Procurement of a wheel-hub dynamometer test stand for measuring performance, efficiency, and energy consumption of electric and hybrid agricultural tractors. Bidders should be specialized equipment manufacturers or engineering firms with expertise in agricultural machinery testing systems and electric/hybrid powertrain characterization.
Supporting services for government – green startup competition and support offers
••••• Ministry· DE
NRW government seeks a service provider to operate a startup competition and support programme for green/sustainable founding companies, targeting entrepreneurs in environmental and climate-tech sectors. Bidders should have expertise in startup ecosystem development, competition management, mentoring, and access to capital/corporate networks.
Engineering design assistance – decarbonation unit and factory reinforcement
••••• organisation· FR
Master of works assistance for engineering design, procurement, and commissioning of a water decarbonation unit and factory reinforcement at Thionville Fensch Agglomeration. Suitable for environmental engineering consultants with expertise in water treatment infrastructure, project management, and regulatory compliance.
Architectural, construction, engineering services – lithium battery recycling technology project design
••••• organisation· CZ
Procurement of architectural, engineering, and inspection services for design and documentation of a lithium-ion battery recycling facility and technology line to recover strategic metals. Bidders should be engineering/architecture firms with expertise in industrial design, waste/recycling technology, and construction documentation.
Energy Services Framework
••••• organisation· GB
Welsh Government seeks energy advisory and carbon reporting services to help public sector and community organisations in Wales reduce emissions and deliver local economic benefits. Bidders should be energy consultancies or carbon-MRV specialists with experience supporting institutional clients.
Preventive and Corrective Maintenance Service for Three Cogeneration Motors at a Spanish Wastewater Treatment Plant
••••• Municipality· ES
Preventive and corrective maintenance service for three cogeneration motors at a wastewater treatment plant (EDAR) in Murcia, Spain. Bidders should have specialized expertise in cogeneration engine maintenance, predictive diagnostics, and emergency repair capabilities for industrial power-generation equipment.
Oxygen and FID measurement instruments
••••• organisation· DE
Procurement of two oxygen analyzers and two flame ionization detectors (FID) for biomass research laboratory use. Bidders must be equipment suppliers capable of delivery, installation, and technical support for analytical instrumentation.
National Freight Model
••••• Department· GB
The funder seeks a supplier to design, develop and implement a new National Freight Model covering road, rail and maritime modes to support UK transport policy and decarbonisation analysis. Bidders should have expertise in multimodal freight modelling, transport analytics, data acquisition and stakeholder engagement.
Role-filling for Interreg RENEW project
••••• organisation· NL
This is a call for role-filling within the Interreg RENEW project, a cross-border innovation initiative focused on maintenance, repair, and overhaul sector professionalization and energy-transition support in the Netherlands. Bidders should be experienced in open-innovation project management, fieldlab facilitation, and multi-stakeholder coordination across industry, education, and research institutions.
Technical Specialist Advisory and Associated Services (Oil & Gas)
••••• Agency· GB
The funder is establishing a dynamic framework market for specialist technical, operational, and advisory services supporting maritime, offshore energy, environmental response, and security activities, including incident response, pollution control, and well intervention. Bidders should be multidisciplinary technical consultants, engineering firms, or consortia capable of delivering advisory, operational, and scientific services in complex, high-risk maritime and offshore environments across the UK and overseas territories.
Tunisia: Assistance to works, engineering supervision and coordination of textile industrial wastewater treatment plant
••••• Bank· TN
Procurement of engineering and project management services for design, supervision, and coordination of an industrial wastewater treatment plant (textile-focused) in Tunisia. Bidders should be engineering firms or consultancies with experience in industrial environmental infrastructure and textile-sector wastewater treatment.
Filtering apparatus – Process gas drying technology with SO2 content
••••• organisation· CZ
Procurement of a two-stage gas drying technology system for removing moisture and SO2 from process gas using condensation and sulfuric-acid absorption. Bidders should be equipment manufacturers or engineering firms with expertise in gas treatment, thermal separation, and chemical absorption systems.
Complete mechanical control retrofit and extended Industry 4.0 digitalization package
••••• organisation· DE
Fraunhofer-Gesellschaft seeks a complete mechanical and control system retrofit (Lot 1) plus an extended Industry 4.0 digitalization package (Lot 2) for manufacturing equipment. Bidders should have expertise in industrial automation, retrofit engineering, and IIoT/Industry 4.0 integration.
Electrical materials – soft starters and variable-frequency drives 2024
••••• organisation· FR
Framework agreement for supply and delivery of soft starters and variable-frequency drives (VFDs) for industrial speed control. Bidders should be electrical equipment manufacturers or distributors with proven capacity to supply industrial motor control devices.
Management support services for green productive transformation action plan 2024-2027
••••• organisation· CO
This tender procures management support services to implement a 2024-2027 action plan focused on productive transformation toward green growth and climate action in Colombia. Bidders should be consulting/management firms with expertise in climate policy implementation, green economy transition, and project coordination for regional autonomous corporations.
Management support services for green productive transformation action plan 2024-2027
••••• organisation· CO
This tender procures management support services for implementing a 2024-2027 action plan focused on productive transformation toward green growth and climate action in Colombia. Bidders should be consulting/management firms with expertise in climate policy, green economy transition, and project implementation in Latin America.
Pilot-Extrusionsanlage
••••• University· DE
The funder seeks to procure a pilot-scale extrusion system, likely for materials research or polymer processing in an academic setting. Bidders should be equipment manufacturers or specialized suppliers with experience in extrusion technology and pilot-plant systems.
Technical Support for Environmental Criteria Integration in Productive Initiatives
••••• Ministry· CO
This tender seeks technical support to integrate environmental criteria into productive initiatives and territorial articulation programs under Colombia's Ministry of Mines and Energy. Bidders should have expertise in environmental sustainability, productive development, and territorial coordination in the energy/mining sector.
Composite forming cell acquisition and commissioning with press and tooling heating/cooling system
••••• organisation· FR
Procurement of a composite forming cell with heating/cooling press system for tooling by the funder (French engineering school). Bidders should be equipment manufacturers or integrators specializing in composite processing machinery and thermal control systems.
CD-PSP-273-2026
••••• Municipality· CO
This tender seeks a service provider to coordinate an economic development and entrepreneurship programme in Sonsón municipality, Colombia, with explicit focus on promoting local competitiveness and transition to sustainable business models. The ideal bidder is an economic development consultant, SME support organization, or sustainability-focused business advisory firm with experience in rural/municipal economic transition.
Consulting services for vibration-based borehole drilling tools project
••••• University· DE
Consulting services for a vibration-based borehole drilling tools project at a German technical university focused on subsurface energy systems. Bidders should have expertise in drilling technology, vibration mechanics, and subsurface energy applications.
Feasibility Study: Grid Connection at Lubmin Industrial Site
••••• organisation· DE
This is a feasibility study for grid connection infrastructure at the Lubmin industrial site in northeastern Germany, likely supporting energy transition or industrial decarbonization. Bidders should have expertise in electrical grid planning, network engineering, and feasibility assessment for industrial sites.
System maintenance services – atmospheric emission analysers and environmental management systems
••••• organisation· FR
Maintenance of atmospheric emission analysers (incineration and boiler systems) and DREAL data-management systems for an industrial waste-incineration facility. Bidders must provide specialized technical expertise in emissions monitoring equipment and environmental compliance software.
Research and development consultancy services – Cooperation Facility for the Philippines Procurement of Technical Assistance to an EU Delegation
••••• Commission
This tender procures on-demand research and development consultancy services to support the EU Delegation in the Philippines across green economy, governance, and strategic communication priorities aligned with the NDICI-Global Europe framework. Bidders should be consulting firms or technical assistance providers with expertise in development policy, green transitions, governance reform, and EU cooperation mechanisms.
Consultant support for startup and investor relations
••••• University· SE
Mälardalen University seeks consultant services to facilitate dialogue and coordination among startups, investors, and established companies in electrification, transport, and energy transition sectors. The contract supports network building and business development to advance innovation projects and investments in clean-energy domains.
Heat-exchange units – Supply of screw heat exchangers
••••• organisation· CZ
Holcim (Česko) seeks supply of screw-type heat-exchange units for industrial thermal management. Bidders should be equipment manufacturers or specialized distributors with expertise in heat-recovery systems and industrial heat-exchanger technology.